Juno-Electrolux JRZ94126 Manual do Utilizador descarregar pdf (Página 12)

Problem Possible cause Solution

The product temperature is too

high.

Let the product temperature de-

crease to room temperature be-

fore storage.

The room temperature is too

high.

Decrease the room temperature.

The compressor does

not start immediately af-

ter pressing the Super

Frost or Schnellkühlen

switch, or after changing

the temperature.

This is normal, no error has oc-

curred.

The compressor starts after a pe-

riod of time.

Temperature cannot be

set .

Super Frost or Schnellkühlen

functions switched on.

Switch off Super Frostor Schnell-

kühlen manually, or wait to set the

temperature until the function has

reset automatically. Refer to Su-

per Frost or Schnellkühlen func-

tion".

The temperature in the

appliance is too low/high.

The temperature regulator is not

set correctly.

Set a higher/lower temperature.

The door is not closed correctly. Refer to "Closing the door".

The product temperature is too

high.

Let the product temperature de-

crease to room temperature be-

fore storage.

Many products are stored at the

same time.

Store less products at the same

time.

The temperature in the re-

frigerator is too high.

There is no cold air circulation in

the appliance.

Make sure that there is cold air cir-

culation in the appliance.

The temperature in the

freezer is too high.

Products are too near to each

other.

Store products so that there is

cold air circulation.

There is too much frost.

Food is not wrapped correctly. Wrap the food correctly.

The door is not closed correctly. Refer to "Closing the door".

The temperature regulator is not

set correctly.

Set a higher temperature.

Replacing the lamp

1. Disconnect the mains plug from the

mains socket.

2. Press on the rear hook and at the same

time slide the lamp cover in the direction

of the arrow.

3. Replace the lamp with one of the same

power and specifically designed for

household appliances. (the maximum

power is shown on the light lamp cover)

4. Install the lamp cover by sliding it into its

original position.

5. Connect the mains plug to the mains

socket.

6. Open the door. Make sure that the lamp

comes on.

Closing the door

1. Clean the door gaskets.

12 electrolux

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

Comentários a estes Manuais

Sem comentários

Juno-Electrolux JRZ94126 Manual do Utilizador Página 12

Comentários a estes Manuais

Manuais e produtos relacionados com não Juno-Electrolux JRZ94126